Ever wondered if the fine sand in your sand filters for your pool is the same as sand within a sand play box for any child? Well, the answer might surprise you. And is generally there a difference between an above-ground or an in-floor filtration system for a pool? They are all good questions and we will include them here in this article. Additionally, we will cover a few servicing questions that arise from time to time as well.
Ideally we can shed some lighting on this subject of yellow sand and see if we can crystal clear some things up for you.
The sand filter works much like how Mother Nature does it on her behalf own by filtering away water that percolates with the ground. Rather than allowing drinking water to just percolate through the mud or ground to get thoroughly clean like with Mother Nature, rather, h2o is forced through a cleansing system containing sand to complete the task.
The sand inside a filtration system is not just any old orange sand that you can pick up at the fine sand pile; it is specifically designed to prevent any particulates that are over a certain size. This is achieved by the uniform granular scale a pool sand filtration.
Normally the average size of the actual sand particles is among 45 millimeters and fifty-five millimeters. Studies have shown which with this uniform size the particular sand is able to collect particles as small as 20 microns. As well as anything over 100 microns will cause problems with a Sandfilteranlage device so you will find larger screens generally discovered prior to the sand filter to maintain them away from this part of the system.
So if you have actually wondered where all of this gathered material goes this is the reason which you, or a maintenance person, will need to backflush the system. This enables the collected debris that must be taken out of the sand filter and also to clean out the system. Over time typically the sand, just like on a seaside will wear down and become as well fine to do its work and will have to be replaced. Additionally, if there is a lot of debris in the pool, from leaves or perhaps a harsh environment, like a mud storm, oils, hair, often the sand may not be able to clear itself properly after back again flush and will have to be changed.
Careful notes of normal water pressure should be kept consistently so it is possible to identify subtle changes over time. Once the sand filtration device gets clogged, pressure will increase. A backwash will be required. In case upon completion of a backwash process the pressure will not return to normal, then replacing the sand media will likely be required.
Check with the manufacturer for that recommended pressure variables. To hold a simple log so that with time you will easily be able to view the changes that will come as the actual sediment becomes a problem in the program.
In addition the periodic backwashing helps the system to operate in maximum efficiency. If the product is half plugged up then your efficiency goes way straight down. This would be like driving around using the brakes on, mileage experiences greatly.
How long the orange sand will last in a filtration system mostly depends upon the condition or the atmosphere it operates in. As formerly stated, if there is a lot of simply leaves or other debris that will comes into contact with the swimming pool this will certainly shorten the life span and the same with oils as well as sun screens that are utilized. And one other item is actually hair. Hair from individuals, as well as from pets in case allowed to be in the water is going to be collected in a sand filtrations system.
There are other options for blocking water for a pool; you are the use of diatomaceous earth or even sometimes referred to as DE within the pool business, requires guide cleaning. The other is an option media such as paper or perhaps twine style media filter systems that need to be replaced when they turn out to be clogged with debris. This is simply not as simple of a process because back flushing a fine sand filter, and in the case of the media filter, there is the needed purchase of a new set of filtration each time the filters come to be blocked and cannot run efficiently any longer.
In light of those options the expense of a three hundred. 00 to $700. 00 sand filtrations system is not really a very expensive proposition. The life from the average sand inside of a yellow sand filtration system for a pool will be thought to be seven years. This particular depends largely upon the surroundings the pools are controlled in and there are reports associated with systems lasting 20 years. Lighting traffic and not much leaves being allowed into the pool area due to pool covers and so on
If you keep a simple record book you will notice when the mud is becoming clogged up along with a backwash is not working along with it once did. Much more frequent backwashing is required and you may see a steady rise in working pressures.
Keeping the ph well balanced as well as the overall water high quality that is introduced to a swimming will make an impact upon overall performance of a sand filtration system too. Hard water will cause an accumulation in the sand as well compared to soft water.
A couple of feasible solutions is employing the usage of a “green sand” method and or a water treatment filtration system to reduce the high nutrient content of the water getting into the pool.
As with almost all equipment, following the manufacturer’s instructions will improve the life and performance of your filtrations system.
There are a large number of good cost-effective sand filtration systems for a pool including the Pentair, Hayward, Swim Time, VIDEO GAME, Sears, and the Intex brand names. All have features that are unique in some ways however very similar in most ways to one another. The systems with bigger capacity will last longer than patients of a smaller capacity as much as the sand media will go.
